Formating In Article

  • Lookup
    Inactive member
  • Topic Author
  • New Member
  • New Member
More
12 years 7 months ago #10079 by Lookup
Formating In Article was created by Lookup
Hi There. I am trying to load HOT Joomla Carosel Pro module into an article. I accompolish this with no problem, but the text displays below the module. I would like the text to wrap to the right of the module. Every code I try doesn't seem to effect anything. I have different modules that wrap the text with no problem. Is there somethng that I'm missing?

Thanks!

Please Log in to join the conversation.

  • milos
    Support Staff
  • Moderator
  • Moderator
More
12 years 7 months ago #10090 by milos
Replied by milos on topic Re: Formating In Article
Do you have enough room there? Did you try to reduce width/height of the module/article in the Hot Joomla Carousel Pro's parameters?

Please Log in to join the conversation.

  • Lookup
    Inactive member
  • Topic Author
  • New Member
  • New Member
More
12 years 7 months ago #10100 by Lookup
Replied by Lookup on topic Re: Formating In Article
Thanks for the reply. Yes, I have reduced the size. I even went down to 50x50 with the same results

Please Log in to join the conversation.

  • milos
    Support Staff
  • Moderator
  • Moderator
More
12 years 7 months ago #10108 by milos
Replied by milos on topic Re: Formating In Article
Important is that you have overall module width set properly, in example 300, and if you in example want to show 3 articles per slide, you should set one article width to about 90 (to leave some space for margins and borders, if you have them enabled). Or, if you want just one article per slide, put article width to in example 280.

Give me your link please to tell you exactly what makes problems.

Please Log in to join the conversation.

  • Lookup
    Inactive member
  • Topic Author
  • New Member
  • New Member
More
12 years 7 months ago #10118 by Lookup
Replied by Lookup on topic Re: Formating In Article
Hi. Thanks again for the reply.
I might not have been clear about what I want to do. I am not having a problem with the configuration itself; I am inserting the module into an article using the {loadposition} function. When I do this, I want the text of the article to wrap around the module. Here’s a link to an image of what I’m trying to accomplish

www.webstockbox.com/wp-content/uploads/2...xt_around_images.gif

It’s a simple procedure when using an image in an article, but for some reason the module, no matter what type coding I include, the text always appears under the module, not to the side. I didn’t know if this was something specific with this module. Any other suggestions would be greatly appreciated!!

Please Log in to join the conversation.

More
12 years 7 months ago #10128 by ivan.milic
Replied by ivan.milic on topic Re: Formating In Article
We would need your link so we could see what should you change.

Please Log in to join the conversation.

Time to create page: 0.292 seconds
Powered by Kunena Forum